
|
|
|
|
Applicator

HotFix applicator wand includes 8 tips and support stand.
Ideal for the crafter.
You can apply rhinestones, rhinestuds,
nailheads,
beads, pearls and more to almost any surface, including
your already printed garments.
$15.75
Applicator Kit
Includes Applicator and Accessories
2 "DIY" EasyFix™
patterns (see "pattern instructions" below).
Left Hearts 5"X3" 2mm/3mm
Right Heart 4"X4" 3mm
1 free gross crystal clear 2mm rhinestones
1 free gross Siam 3mm rhinestones
1 free gross Silver 3mm rhinestuds
$20.25

2 mm and 3 mm rhinestones are ideal size for
all your personalized
stationary projects: party invitation cards, wedding invitation
cards, Christmas cards, birthday cards and much more.
+ 8 tips + 1
cleaning brush
+ 10 heart storage
+ 25 gross 3 mm crystal clear
+ 25 gross 2 mm crystal clear
(7200 rhinestones)
$38.95
Plastic Storage Containers
|
10 Heart Shape Plastic Storage Container $2.25 |
Heart Plastic Storage Container 9 Compartments $2.00 |
|
Round Plastic Storage Container 6 Compartments $2.00 |
Round Plastic Storage Container 12 Compartments $1.50 |
Storage Containers Package Deal
|
Wheel Model 1
|
Wheel Model 2 $10.25
|
|
Wheel Model 3 $10.25
|
Wheel Model 4 $15.25
|
|
Wheel Model 5 $24.50
|
Do it
yourself EasyFix™ Patterns
exclusively at Rhinestone Canada
|
DIY Pocket Jeans Model A $5.00/pair |
DIY Pocket Jeans and T-shirt Set Model B $5.50/kit |
|
DIY Pocket Jeans Model E $5.50/kit |
DIY Pocket Jeans Model F $6.00/kit |
|
DIY Pocket Jeans Model G $6.00/kit |
DIY Model H $5.00 |
|
DIY Heart Pattern Model C $2.50 |
DIY Double heart Pattern Model D $2.50 |
Pocket Jeans Ideas
|
|
|
|
|
|
Applicator Instructions
(Read carefully before use)
(Not for children under 12)
Products information:
Voltage : 110V-240V
Power: 4.8-6W
Tips: 7 tips ( 2MM, 3MM, 4MM, 5MM, Hot Spot, 7MM, 9MM Flat)
How To Use
1. Set the tip on the applicator according to the size of rhinestone.
2. Plug the applicator and fully heat the tip for 2 minutes.
3. Put the rhinestone on the target placement, hold the applicator and put it on the head of rhinestone vertically for 30-60 seconds .
4. Remove the applicator and check if the rhinestone sticks on the fabric firmly, if not, reheat the rhinestone until it sticks firmly.
5. If a stone gets stuck in the applicator, use tweezers (not incl.) to free the stone.
6. Use a metal brush (not incl.) to clean the applicator once it has cool down.
7. If a stone appears to be misplaced, just re-heat it, and re-apply on the right spot.
8. You can find training videos on our "Info-Video" page.
9. Repeat above to make your own designs by rhinestone.
Warning!
1. Do not touch the metal parts of the applicator,it is very hot and will burn flesh.
2. Only change the tips after cutting off the power and letting the applicator cool down. Or change the tips by wrapping them in cotton fabric which would prevent your hand from directly touching the metal parts.
3. This applicator is not a toy. Do not let children use this device.
EasyFix™
Pattern Instructions
1. Remove slowly the adhesive heat resistant clear sheet from the white backing sheet.
2. Apply directly on a T-shirt (or any apparels), pressing firmly.
3. Once your pattern is in place, insert stones in each hole and apply heat (follow "Applicator Instructions")
4. When all stones are in place, slowly remove your pattern.
5. Et voila! Your design is done!
6. Your pattern can be re-used several times.
Tips: Rhinestud glue melt faster than rhinestone glue.
You can use your fingernail to move the stones/studs around.
It is easier to use the flat tip to heat your stones/studs.


![]() |
Copyright © 2010 [RhinestoneCanada]. All rights reserved. Webmaster: tiger777@telus.net Revised: 01/25/12.